Understanding LED indicator status lights and information | SoundLink® wireless music system
soundlink®-wireless-music-system
SoundLink® wireless music systemSold from 2009 - 2011

Understanding LED indicator status lights and information | SoundLink® wireless music system

SoundLink USB Key LED Status Indicator

LED StateDescription
Status light offOffUSB Key is not Powered
Status light blinking slowlySlow FlashingPowered and Available for Connecting to the SoundLink speaker
Status light blinking quicklyFast FlashingEstablishing a Connection
Status light onOnConnected to the SoundLink Speaker

SoundLink Speaker LED Status Indicators

Wireless LED

LED StateDescription
OffNo wireless connection
OnWireless source is connected
Fast FlashingWireless source is connecting
Slow PulsingSystem is in discovery mode and waiting for a signal
The Wireless LED will flash while receiving a command from the remote or the buttons on the side of the SoundLink speaker are pressed. Once the system reaches maximum or minimum volume the LED will start to flash faster


Battery - During Manual Battery Check

LED StateDescription
Green70% or more of full charge
Yellow20% to 70% of full charge
Flashing Red20% or less (charging needed)

Battery - While Charging the Battery

LED StateDescription
YellowBattery is Charging
OffCharging Cycle Done

AUX LED

LED StateDescription
OffAUX source is not selected
OnAUX source is selected
The AUX LED will not stay lit unless there is an actual connection plugged in the AUX jack on the back of the SoundLink speaker. Also, the AUX LED will flash while receiving a command from the remote or the buttons on the side of the SoundLink speaker are pressed. Once the system reaches maximum or minimum volume the LED will start to flash faster

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT