Resetting your product | Bose Ultra Open Earbuds
bose-ultra-open-earbuds
Bose Ultra Open EarbudsSold from 2024

Resetting your product | Bose Ultra Open Earbuds

To reset the earbuds:

Note: Resetting the earbuds clears its Bluetooth device list.
  1. Place both earbuds in the charging case. They should magnetically snap into place.
  2. With the charging case open, press and hold the button on the back of the case for 20 seconds until the earbud status light blinks white 2 times, slowly blink blue, and then turn off.
When the reset is complete, the earbud status lights glow according to the charging status, then slowly blink blewmd&ash;indicting the earbuds are in discoverable mode so they can be found and connected to another device.

Restoring the Earbuds to Factory Settings

A restore to factory settings clears all settings and returns the earbuds to their original out-of-box state. After, the earbuds can be configured as if they were being set up for the first time.

To restore the earbuds to factory settings:

  1. On the device(s) connected to the earbuds, remove the Bose Ultra Open Earbuds from the list of paired/connected devices.
  2. In the Bose App, remove the earbuds from your Bose account icon
  3. With the earbuds in the charging case and the case open, press-and-hold the button on the back of the case for 20 seconds until the earbuds status lights blink white twice, slowly blink blue, and then turn off.
  4. Repeat the previous step two more times.
    After the third time, the status lights blink amber for three seconds to indicate factory settings are being restored.
When the restore is complete, the status lights slowly blink blue. The earbuds are now in their original out-of-box state.

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT