Understanding LED indicator status lights and information | Bose wireless computer speaker
bose-wireless-computer-speaker
Bose wireless computer speakerSold from 2012 - 2013

Understanding LED indicator status lights and information | Bose wireless computer speaker

SoundLink USB Key LED Status Indicator

LED StateDescription
\"StatusOffUSB Key is not Powered
\"StatusSlow FlashingPowered and Available for Connecting to the SoundLink speaker
\"StatusFast FlashingEstablishing a Connection
\"StatusOnConnected to the SoundLink Speaker

Wireless Computer Speaker LED Status Indicators

Wi-Fi Indicator

LED StateIndicates
OffNo wireless connection
OnWireless source is connected
Fast FlashingWireless source is connecting
Slow PulsingSystem is in discovery mode and waiting for a signal
The Wireless LED will flash while receiving a command from the remote or the buttons on the side of the SoundLink speaker are pressed. Once the system reaches maximum or minimum volume the LED will start to flash faster

Battery Indicator (when checking the battery status)

ColorIndicates
Green70% or more of full charge
Yellow20% to 70% of full charge
Flashing Red20% or less (charging needed)


Battery Indicator (while charging)

ColorIndicates
YellowBattery is charging
OffCharging cycle done


AUX Indicator

OffAUX source is not selected
OnAUX source is selected
The AUX LED will not stay lit unless there is an actual connection plugged in the AUX jack on the back of the speaker. Also, the AUX LED will flash while receiving a command from the remote or the buttons on the side of the speaker are pressed. Once the system reaches maximum or minimum volume the LED will start to flash faster

Was this article helpful?

YES
NO
START A REPAIR OR REPLACEMENT