Le microphone capte trop de son | SoundComm™ B30 headset

Microphone placement is important for clear communication. With the headset on your head, make these adjustments:

1. Grasp the boom with your fingers and move the microphone so it is level with your mouth
2. Position the microphone a 1/2" from your mouth with the Bose logo facing away from your mouth

Note: If speaking at elevated volume, the mic might need to be moved further from the lips to avoid distortion. As the mic is moved farther away, more background noise will be picked up by the mic. For clearest communication, the steps above are recommended while using a normal speaking voice.

Si l'interphone n'est pas correctement configuré pour être utilisé avec le casque d'écoute, le niveau sonore et la qualité ne peuvent pas en souffrir. Pour plus d'informations, reportez-vous à la section Configuration des paramètres de gain d'interphone de casqued'écoute .

In high-noise environments or when speaking too loudly into the microphone, sound passing through the microphone can become distorted since the signal is also boosted by the active electronics in the headset

Turn off the power switch to disable ANR and use the headset passively. If the issue is resolved, use the headset passively until volume levels near the microphone are reduced

Branchez une autre paire d'écouteurs à l'appareil audio pour vérifier si le problème vient de l'appareil ou de ses réglages.